The Trainer: What It Is and Why It Appeared

After a check on one of the adder levels the game may show a window: "It looks like the carry from the lower digit is being ignored. Want to practice?". That is the trainer — a short series of problems built around one specific mistake. This article explains where the game learns about the mistake, how the series is put together, and what the trainer changes and what it does not.

Where the game learns about the mistake

On levels 7 "Full Adder" and 8 "8-bit Adder" the check compares your schematic with the correct answer row by row: on every input you can see what your circuit produced and what it should have produced. When rows disagree, the pattern of those disagreements points at a type of mistake.

A circuit that ignores the carry from the lower digit does not fail at random: on inputs without a carry it answers correctly, and on inputs with a carry it always misses. Such a recognizable pattern is called an error signature. One check is not yet proof — a miss can be accidental. The trainer appears only after two independent observations on different tasks, and even then the choice is yours.

Classification also has a third outcome: "undetermined". If the schematic is incomplete or its errors do not fit any known pattern, the game makes no guesses and offers nothing. That silence is the right behavior: a guess about your misconception without evidence only gets in the way.

The 3+2 series

A series consists of three base tasks:

The table is interactive: the input rows are given, and in every output cell a click cycles the value through "empty → 0 → 1". Fill in all rows and press "Check" — the game will show, row by row, where the schematic disagrees with you. This way of reading a schematic exists only inside the trainer; the main course is untouched by it.

If a task fails twice (two unsuccessful checks), the series replaces it with an extra one: the same trap, a different variant. Extras are capped at two, so the series cannot grow forever. You can leave at any moment with the "Back to the course" button; series progress is saved, and the next time you enter you will continue where you stopped.

The second family: overflow and carry

Besides carry, the game trains another frequent confusion — signed overflow. The correct rule: overflow happens when the carry into the top bit and the carry out of the top bit disagree. The misconception the trainer targets is simpler: "a carry out of the top bit means overflow happened". On the pairs 127 + 1 (overflow without carry) and 255 + 1 (carry without overflow) the two rules give different answers.

The level-check diff does not help here: up to level 25 the course simply has no "overflow" output. Detection works differently in this family. The source is the concept check of level 25, "Negative Check": if you pick the option about the accumulator overflowing and resetting to zero, the game marks the episode. After you fail this check a second time, a short diagnostic opens with five questions: for each pair of numbers, two answers — "carry?" and "overflow?". If your answers repeat the mistake "overflow equals carry" on both distinguishing examples, the series offer appears. Its three base tasks have no schematics: pairs of numbers, two answers each. If the diagnostic answers correctly or inconsistently, no offer comes: in the first case there is no misconception, in the second there is too little data.

How often this confusion occurs across players is not measured yet; diagnostic telemetry will collect those numbers over time. The overflow series button appears in the Skills tab, in the "Trainers" section, once the signature is confirmed.

What the trainer does not do

The trainer stands apart from the main course, and the boundaries are worth stating plainly:

After you finish a series the button in the Skills tab stays: it starts another training run with new task variants, in case you want to consolidate the topic.

How it connects to the intros and the tutor

The trainer complements two existing tools of the course. The intros (primers — for example, "Binary Addition") explain a topic from zero: experience, rule, carry. The trainer switches on when the topic has already appeared and one specific step keeps failing, and it offers practice aimed at exactly that step. The AI tutor helps with words: it explains and hints at the schematic. The trainer works with problems: instead of an explanation, several schematics where the trap appears in different variants. If the trainer cleared things up but a question remains, the tutor is nearby; if you would rather see the theory first, open the intro before the level.

FAQ

Is the trainer a punishment for mistakes?

No. The game offers it only after the same mistake has been confirmed on two different tasks. It is an invitation to practice problems aimed at that exact trap, not a grade and not a mark.

How many tasks are in a series?

Three base tasks: two adder builds of a given width and one restore-the-truth-table task on a locked schematic. If a task fails twice, the series adds a replacement one with the same trap and a new variant. There are at most two extras.

Does the trainer affect progress or grades?

It does not. It never marks course levels as completed, never moves tiers and statuses in the Skills tab, and awards no rewards. The series lives separately from the main course.

What if I decline?

Nothing happens: the course continues as before. The offer will not come back for at least a week, and you can enter the trainer at any time from the Skills tab.

Where does the overflow trainer come from, if no level has such an output?

Not from the schematic check. The source is the concept check of level 25: picking the option about the overflowing accumulator marks the episode, and after a second failure a short diagnostic opens with five "carry? overflow?" questions. The series offer comes only if your answers repeat the mistake "overflow equals carry" on both distinguishing examples: 127 + 1 and 255 + 1.

Test yourself

Your circuit adds 0101 + 0011 correctly but fails on 0110 + 0011 and on 1001 + 0001. Where should you look?

Compute by hand where a carry between digits must appear: 0110 + 0011 = 1001 (carry out of digit 2), 1001 + 0001 = 1010 (carry out of digit 0). Both misses sit on inputs with a carry, while inputs without one are handled correctly. That is the "carry ignored" pattern: look at the CarryIn → CarryOut chain.

Why is one miss on level 7 not enough?

A miss can be accidental: a wire left loose, the wrong input. One bad result cannot tell a misconception from an accident. Two independent observations on different tasks with the same disagreement pattern are already evidence, and only then does the game make its offer.

In the restore-the-table task the schematic cannot be changed. How do you find its behavior?

Through the table. Fill the output cells with your expectations and press "Check": the rows where the game disagrees show where the circuit behaves differently from what you thought. The gap between "what you believed" and "what is really there" is exactly the material to study.

What you can do today: play level 7 "Full Adder" and level 8 "8-bit Adder" — the game is here. If the trainer decides to offer a series, accepting is optional: the course is not going anywhere, and the button in the Skills tab will stay in place.

Open the game →